Luigi Pizzolito's Logo

Hantek 6022BL AC-Coupling Mod

Recently I purchased the low-cost 20MHz Hantek 6022BL USB oscilloscope and logic analyzer. This is a great little scope that has open-source firmware available as well as a few community mods, which this post is about. It lacks an AC coupling input mode, which seems like its an overlooked feature, but that can be easily added.

Opening up the oscilloscope casing, we can see the sparse PCB inside. Including the Cypress CY7C68013A-100AXC MCU, a small EEPROM and some front-end components.

PCB of Hantek 6022BL

A lot of information about it is available on the Sigrok Wiki as in logic analyser mode this device is compatible with Sigrok.

Following the guide from the OpenHantek6022 GitHub repo, we can see where we need to add the decoupling capacitors and the opto-couplers to switch AC-coupling on and off.

OpenHantek6022_AC_Modification-2019-11-15.pdf
1 MB
Download

After gathering the components, I found a suitable layout to solder the components dead-bug style onto the scope PCB, while taking the opto-coupler enable signals from the edge connector:

The end result was a nice and easy modification that adds AC-coupling which makes it much easier to work with AC signals. Particulairly useful for future audio work I plan to do.

A highly valuable addition to anyone’s electronics toolkit. For the cost this 6022BL is really unbeatable for a 20MHz scope plus 16-channel logic analyser and I highly recommend it.

Categories
Tags