An Absolutely Beautiful Wire Spool
This project is a silly exercise in the magic of going from CAD, to 3D printing, to identical real-world object. I needed a wire dispenser for my electronics work and decided to go all out designing a custom dispenser box.
CAD
The work started in Fusion360, I went with a basic but clever design. A transparent lid is used to show the remaining about of wire left in each of the six spools, steel rods are used to route the wires out from the spools and into their dispenser holes, and M10 bolts are used as the axels for the spools, with planar bearings in between the spool carriages to ensure smooth rotation:
Honestly, complete overkill for a wire dispenser, but totally maxing out the aesthetics and weight to feel premium. I even got the light box out for these photos.
3D Printing Parts
I gathered all of the mechanical parts, and the main body was printed using my professor’s Bamboo Lab printer at my university; as it didn’t fit my print bed and I wanted maximum quality for the body. The spool and spool spacers were printed on my AnyCubic Kossel Mini, as they are less critical.
Each spool holds 10m of 24AWG solid core wire, perfect for easy and convenient breadboard, proto-board, and misc electronics work.
Assembly
Assembly started by super gluing the M3 nuts in place that hold the top cover on:
Then, the threaded stainless steel rod segments were assembled and installed in each of the redirection bars; using a PLA spacer and matching M3 screw to complete the connection on one side:
Lastly, the spools themselves were installed in together with the planar bearing spacers. Different coloured anodized aluminium rings were used to mark visually the output holes for each of the wire colors:
Showcase
And there we have it, a beautiful and over-engineered wire spool dispense.
A little bit of a disaster
Instead of ordering the transparent cover SLA print from a professional service such as JLCPCB. I opted to print it myself using a friend’s AnyCubic 8K SLA printer… Unfortunately, despite buying the clearest SLA resin I could find, not only did the print come out warped, but even after sanding, polishing and clear-coat; it never achieved a satisfactory transparency finish.
Oh well, that’s all folks.